init commit

devices/common-msm8909/70-nokia-argon-keypad.rules

@@ -0,0 +1,3 @@
+SUBSYSTEM=="input", KERNEL=="event*", ATTRS{name}=="keypad", ENV{ID_INPUT_KEYBOARD}="1"
+SUBSYSTEM=="input", KERNEL=="event*", ATTRS{name}=="gpio-keys", ENV{ID_INPUT_KEYBOARD}="1"
+SUBSYSTEM=="input", KERNEL=="event*", ATTRS{name}=="pm8941_resin", ENV{ID_INPUT_KEYBOARD}="1"

devices/common-msm8909/msm-modem-uim-selection

@@ -0,0 +1,6 @@
+# Maximum time to wait for SIM card to appear after starting the modem.
+# Some SIM cards or modem firmwares might take longer to initialize. :(
+# To avoid blocking boot without a SIM card for too long this is fairly short
+# by default (4 seconds), but you can increase it to e.g. 30 seconds if necessary.
+# Set to 0 to disable waiting entirely.
+sim_wait_time=4

devices/common-msm8909/ucm2/msm8916-1mic/HiFi.conf

@@ -0,0 +1,15 @@
+# Use case configuration for common MSM8916 devices. No SecondaryMic.
+# All analog outputs/inputs connected to internal PM8916 codec.
+
+Define {
+	WcdPlaybackPCM "hw:${CardId},0"
+	WcdCapturePCM "hw:${CardId},1"
+}
+<platforms/msm8916/qdsp6-components.conf>
+
+<codecs/msm8916-wcd/Speaker.conf>
+<codecs/msm8916-wcd/Earpiece.conf>
+<codecs/msm8916-wcd/Headphones.conf>
+
+<codecs/msm8916-wcd/PrimaryMic.conf>
+<codecs/msm8916-wcd/HeadsetMic.conf>

devices/common-msm8909/ucm2/msm8916-1mic/msm8916-1mic.conf

@@ -0,0 +1,6 @@
+Syntax 3
+
+SectionUseCase."HiFi" {
+	File "HiFi.conf"
+	Comment "Play and record HiFi quality Music"
+}

devices/common-msm8909/ucm2/msm8916/HiFi.conf

@@ -0,0 +1,16 @@
+# Use case configuration for common MSM8916 devices.
+# All analog outputs/inputs connected to internal PM8916 codec.
+
+Define {
+	WcdPlaybackPCM "hw:${CardId},0"
+	WcdCapturePCM "hw:${CardId},1"
+}
+<platforms/msm8916/qdsp6-components.conf>
+
+<codecs/msm8916-wcd/Speaker.conf>
+<codecs/msm8916-wcd/Earpiece.conf>
+<codecs/msm8916-wcd/Headphones.conf>
+
+<codecs/msm8916-wcd/PrimaryMic.conf>
+<codecs/msm8916-wcd/SecondaryMic.conf>
+<codecs/msm8916-wcd/HeadsetMic.conf>

devices/common-msm8909/ucm2/msm8916/msm8916.conf

@@ -0,0 +1,6 @@
+Syntax 3
+
+SectionUseCase."HiFi" {
+	File "HiFi.conf"
+	Comment "Play and record HiFi quality Music"
+}

devices/common-msm8909/zram-init

@@ -0,0 +1,142 @@
+# zram settings...
+# SPDX-License-Identifier: GPL-2.0-only
+
+# load zram kernel module on start?
+load_on_start=yes
+
+# unload zram kernel module on stop?
+unload_on_stop=yes
+
+# Number of devices.
+# This value is also passed to the kernel module on modprobe.
+num_devices=2
+
+# For each device, specify the following variables
+# Omitting them is the same as specifying them as empty: It uses defaults
+# type0, type1, ... are the variables for the types (see below)
+# size0, size1, ... are the variables for the sizes (in MB)
+# mlim0, mlim1, ... are the variables for the maximal uncompressed memory (MB)
+# back0, back1, ... are the variables for the backup device (paths)
+# icmp0, icmp1, ... are the flags (nonempty = true) whether incompressible
+#                   pages are written to the backup device (requires back*)
+# idle0, idle1, ... are the flags (nonempty = true) whether idle pages are
+#                   written to the backup device (requires back*)
+# wlim0, wlim1, ... set the writeback_limit for idle pages (implies idle*)
+# algo0, algo1, ... are the variables for the compression algorithms
+# para0, para1, ... are the variables for the algorithm parameters
+# flag0, flag1, ... are the variables for the flags
+# labl0, labl1, ... are the variables for the label name (if you want some)
+# uuid0, uuid1, ... are the variables for the UUID (if you want to force it)
+# args0, args1, ... are the variables for additional arguments to zram-init
+#                   (args0, args1, ... are eval'd, so quote correspondingly!)
+# notr0, notr1, ... are the flags (nonempty = true) for "do not trim (discard)"
+# (set notr* to a nonempty value only for linux-3.14 or earlier or when you
+# are prepared to waste a lot of memory for a possibly slight speed increase)
+#
+# The following are ignored for type swap but not for the other types:
+# blck0, blck1, ... are the variables for the blocksize (ext2, ext4)
+# irat0, irat1, ... are the variables for the byte/inode ratio (ext2, ext4)
+# inod0, inod1, ... are the variables for the inode number (ext2, ext4)
+# opts0, opts1, ... are the variables for the mount options
+# mode0, mode1, ... are the variables for the directory mode
+# owgr0, owgr1, ... are the variables for the directory owner:group
+#
+# If the size is 0 (or empty) the device is ignored by the script.
+#
+# Available types:
+# "swap"  The device is initialized as a swap device.
+#         The flags variable specifies the priority (16383 if empty).
+#         Use "-" in the flags variable for the default priority (-1)
+# "/..."  The device is mounted on /...
+#         The flags variable specifies the type (ext2, ext4, btrfs, or xfs;
+#         default is ext4)
+# "-"     The filesystem (specified by flags as above) is created in
+#         /dev/zram$NUM but not mounted
+# Devices with other types are ignored by the script
+#
+# Only variables with numbers  0 ... num_devices-1  are used by the script.
+
+# swap - 500M (or a fourth of available memory if uncommenting)
+type0=swap
+flag0= # The default "16383" is fine for us
+size0=512
+#size0=`LC_ALL=C free -m | awk '/^Mem:/{print int($2/4)}'`
+mlim0= # no hard memory limit
+back0= # no backup device
+icmp0= # no incompressible page writing to backup device
+idle0= # no idle page writing to backup device
+wlim0= # no writeback_limit for idle page writing for backup device
+notr0= # keep the default on linux-3.15 or newer
+algo0=zstd # zstd (since linux-4.18), lz4 (since linux-3.15), or lzo.
+           # Size: zstd (best) > lzo > lz4. Speed: lz4 (best) > zstd > lzo
+para0= # No algorithm parameters
+labl0=zram_swap # the label name
+uuid0= # Do not force UUID
+args0= # we could e.g. have set args0="-L 'zram_swap'" instead of using labl0
+
+# /tmp - 2G
+# If you use this, you should put zram-init into the boot runlevel,
+# and services using /tmp should be in the default runlevel and/or have
+# rc_need=zram-init in their /etc/conf.d/... file
+type1=/tmp
+flag1=ext4
+size1=2048
+mlim1= # no hard memory limit
+back1= # no backup device
+icmp1= # no incompressible page writing to backup device
+idle1= # no idle page writing to backup device
+wlim1= # no writeback_limit for idle page writing for backup device
+blck1=1024 # the default blocksize of 4096
+irat1= # bytes/inode ratio
+inod1= # inode number
+opts1="strictatime,nosuid,nodev,noexec" # e.g. "relatime" or "noatime" are also reasonable choices
+mode1=1777
+owgr1= # No reason to change the default "root:root"
+notr1= # keep the default on linux-3.15 or newer
+algo1=zstd
+para1="level=3" # algorithm-specific parameters such as compression level
+labl1=tmp_dir
+uuid1=
+args1=
+
+# /var/tmp - 1G
+type2=/var/tmp
+flag2=ext2
+size2=1024
+mlim2= # no hard memory limit
+back2= # no backup device
+icmp2= # no incompressible page writing to backup device
+idle2= # no idle page writing to backup device
+wlim2= # no writeback_limit for idle page writing for backup device
+blck2= # the default blocksize is 4096
+irat2= # bytes/inode ratio
+inod2= # inode number
+opts2=relatime # e.g. "noatime" or "strictatime" are also reasonable choices
+mode2=1777
+owgr2= # No reason to change the default "root:root"
+notr2= # keep the default on linux-3.15 or newer
+algo2=zstd
+para2= # No algorithm parameters
+labl2=var_tmp_dir
+uuid2=
+args2=
+
+# Artificial example with btrfs
+# (Not actually used here: variables are overridden afterwards by other values)
+type3=- # Only format the filesystem but actually do not mount it
+flag3=btrfs
+size3=1024
+algo3=zstd
+labl3=zbtrfs
+uuid3=
+args3=
+
+# swap - 500M
+# The following is not used by the default (num_devices=3).
+type3=swap
+flag3=
+size3=512
+algo3=zstd
+labl3=zram_swap2
+uuid3=
+args3=

devices/nokia-argon/00-nokia-argon-display.files

@@ -0,0 +1 @@
+/lib/firmware/nokia,argon-gc9305-v2-panel.bin

devices/nokia-argon/APKBUILD

@@ -0,0 +1,62 @@
+# Reference: <https://postmarketos.org/devicepkg>
+maintainer=""
+pkgname=device-nokia-argon
+pkgdesc="Nokia 8110 4G"
+pkgver=10
+pkgrel=0
+url="https://postmarketos.org"
+license="GPL-2.0-only"
+arch="armv7"
+options="!check !archcheck"
+depends="
+	linux-postmarketos-qcom-msm8916
+	mkbootimg
+	postmarketos-base
+	soc-qcom-msm8909
+	soc-qcom-msm8916-rproc
+"
+subpackages="$pkgname-nonfree-firmware:nonfree_firmware"
+makedepends="devicepkg-dev mipi-dbi-cmd"
+_panel="nokia,argon-gc9305-v2-panel"
+source="
+	00-nokia-argon-display.files
+	deviceinfo
+	kernel-cmdline.conf
+	modules-initfs
+	$_panel.txt
+"
+
+build() {
+	devicepkg_build $startdir $pkgname
+	mkdir -p "$builddir"
+	mipi-dbi-cmd "$builddir"/"$_panel".bin \
+			"$srcdir"/"$_panel".txt
+}
+
+package() {
+	devicepkg_package $startdir $pkgname
+	# Package display init sequence
+	install -Dm644 "$builddir"/"$_panel".bin -t \
+			"$pkgdir"/lib/firmware/
+	install -Dm644 "$srcdir"/00-nokia-argon-display.files -t \
+			"$pkgdir"/usr/share/mkinitfs/files/
+}
+
+nonfree_firmware() {
+	pkgdesc="GPU/WiFi/BT/Modem/Video firmware"
+	depends="
+		firmware-qcom-adreno-a300
+		msm-firmware-loader
+		firmware-nokia-argon-venus
+		firmware-nokia-argon-wcnss-nv
+	"
+	mkdir "$subpkgdir"
+}
+
+sha512sums="
+66302bb5d83c4ba155ff62405fb9a374ab76e1912411310b1ad75e00c216b6868da4e2b6f3987c97146389aa44b2b2c26f0ca0819566be45c9d0d2dd1d3b72f1  00-nokia-argon-display.files
+ef4587f749b941761cb7838d9e21e0bd9436693a4a8bd38ac5d7cae6e9ceb2c1e7358d5fe9a34b23d6ff484c81079533eaee6c3e609d8bc685902ff150e1e79d  deviceinfo
+37e1e5f8839b624ab3eb850a24ed4daeb61a651257a1fb593f49cb869323e5d1b339c831a18eb26a9d7bd0a618ea9eb2bb9bf3882133af5f2606a878e6d39c67  kernel-cmdline.conf
+749fa5911f53f65c1a18a8768d374d1ea39ef47ed61146a5f79d669250788501434a059cfff65b83cb54eb7273841686b4a3a04f20aaec6ec7f742e14623c8bc  modules-initfs
+dd82fd4732694a24c91339b5c5fbb0bf485b3b2da3c17c11b72a02e90e9827c367504c99894556dd8273f927408cdb187325e5f3b9ea9e4a82e3cb3798cb2816  nokia,argon-gc9305-v2-panel.txt
+"

devices/nokia-argon/deviceinfo

@@ -0,0 +1,36 @@
+# Reference: <https://postmarketos.org/deviceinfo>
+# Please use double quotes only. You can source this file in shell
+# scripts.
+
+deviceinfo_format_version="0"
+deviceinfo_name="Nokia 8110 4G"
+deviceinfo_manufacturer="Nokia"
+deviceinfo_codename="nokia-argon"
+deviceinfo_year="2018"
+deviceinfo_dtb="qcom-msm8905-nokia-argon"
+deviceinfo_append_dtb="true"
+deviceinfo_arch="armv7"
+deviceinfo_swap_size_recommended="512"
+
+# Device related
+deviceinfo_chassis="handset"
+deviceinfo_external_storage="true"
+deviceinfo_screen_width="240"
+deviceinfo_screen_height="320"
+deviceinfo_drm="true"
+
+# Bootloader related
+deviceinfo_flash_method="fastboot"
+deviceinfo_generate_bootimg="true"
+deviceinfo_generate_extlinux_config="true"
+deviceinfo_flash_pagesize="2048"
+deviceinfo_header_version="0"
+deviceinfo_flash_offset_base="0x80000000"
+deviceinfo_flash_offset_kernel="0x00008000"
+deviceinfo_flash_offset_ramdisk="0x02700000"
+deviceinfo_flash_offset_second="0x00f00000"
+deviceinfo_flash_offset_tags="0x02500000"
+deviceinfo_flash_sparse="true"
+
+# lk2nd does not support GPT for subpartitions/SD cards yet
+deviceinfo_partition_type="msdos"

devices/nokia-argon/kernel-cmdline.conf

@@ -0,0 +1,2 @@
+earlycon
+console=ttyMSM0,115200

devices/nokia-argon/modules-initfs

@@ -0,0 +1,5 @@
+pm8916-lbc
+pm8916-bms-vm
+panel-mipi-dbi
+matrix_keypad
+matrix_keymap

devices/nokia-argon/nokia,argon-gc9305-v2-panel.txt

@@ -0,0 +1,34 @@
+# Based on arch/arm/boot/dts/argon/spi-panel-gc9305-v2-qvga-cmd from
+# the downstream kernel, which is:
+# Copyright (c) 2017, The Linux Foundation. All rights reserved.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License version 2 and
+# only version 2 as published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+
+command 0x36 0x00
+command 0x3a 0x55 # format: 65K 16bit
+command 0x35 0x00 # TE v-blanking
+command 0xb2 0x0c 0x0c 0x00 0x33 0x33 # porch setting
+command 0xb7 0x75 # gate control VGH VGL
+command 0xbb 0x34 # Vcoms setting 1.4v
+command 0xc0 0x2c # LCM control
+command 0xc2 0x01 # VDV VRH COMMAND ENABLE
+command 0xc3 0x0d # VRH SET
+command 0xc4 0x20 # VDV SET
+command 0xc6 0xef # frame rate
+command 0x44 0x00 0x00 # SET TEARING SCAN LINE
+command 0xd0 0xa4 0xa1 # power control 1
+
+# gamma
+command 0xe0 0xd0 0x02 0x09 0x0d 0x0e 0x19 0x30 0x51 0x43 0x09 0x14 0x13 0x18 0x21
+command 0xe1 0xd0 0x02 0x09 0x0d 0x0d 0x18 0x32 0x46 0x42 0x09 0x13 0x13 0x17 0x21
+
+command 0x11 # sleep out
+delay 120
+command 0x29 # display on

devices/nokia-beatles/00-nokia-beatles-display.files

@@ -0,0 +1,2 @@
+/lib/firmware/nokia,beatles-gc9305-panel.bin
+/lib/firmware/nokia,argon-gc9305-v2-panel.bin

devices/nokia-beatles/deviceinfo

@@ -0,0 +1,31 @@
+# Reference: <https://postmarketos.org/deviceinfo>
+deviceinfo_format_version="0"
+deviceinfo_name="Nokia 2720 Flip"
+deviceinfo_manufacturer="Nokia"
+deviceinfo_codename="nokia-beatles"
+deviceinfo_year="2019"
+deviceinfo_dtb="qcom-msm8905-nokia-beatles"
+deviceinfo_append_dtb="true"
+deviceinfo_arch="armv7"
+deviceinfo_swap_size_recommended="512"
+
+# Device related
+deviceinfo_chassis="handset"
+deviceinfo_external_storage="true"
+deviceinfo_screen_width="240"
+deviceinfo_screen_height="320"
+deviceinfo_drm="true"
+
+# Bootloader related
+deviceinfo_flash_method="fastboot"
+deviceinfo_generate_bootimg="true"
+deviceinfo_generate_extlinux_config="true"
+deviceinfo_flash_pagesize="2048"
+deviceinfo_header_version="0"
+deviceinfo_flash_offset_base="0x80000000"
+deviceinfo_flash_offset_kernel="0x00008000"
+deviceinfo_flash_offset_ramdisk="0x02700000"
+deviceinfo_flash_offset_second="0x00f00000"
+deviceinfo_flash_offset_tags="0x02500000"
+deviceinfo_flash_sparse="true"
+deviceinfo_partition_type="msdos"

devices/nokia-beatles/kernel-cmdline.conf

@@ -0,0 +1,2 @@
+earlycon
+console=ttyMSM0,115200

devices/nokia-beatles/modules-initfs

@@ -0,0 +1,5 @@
+pm8916-lbc
+pm8916-bms-vm
+panel-mipi-dbi
+matrix_keypad
+matrix_keymap

devices/nokia-beatles/nokia,beatles-gc9305-panel.txt

@@ -0,0 +1,35 @@
+# Nokia 2720 Flip (nokia-beatles) 2.8-inch 240x320 QVGA SPI MIPI-DBI panel
+# Based on arch/arm/boot/dts/argon/spi-panel-gc9305-v2-qvga-cmd from
+# the downstream kernel, which is:
+# Copyright (c) 2017, The Linux Foundation. All rights reserved.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License version 2 and
+# only version 2 as published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+
+command 0x36 0x00
+command 0x3a 0x55 # format: 65K 16bit
+command 0x35 0x00 # TE v-blanking
+command 0xb2 0x0c 0x0c 0x00 0x33 0x33 # porch setting
+command 0xb7 0x75 # gate control VGH VGL
+command 0xbb 0x34 # Vcoms setting 1.4v
+command 0xc0 0x2c # LCM control
+command 0xc2 0x01 # VDV VRH COMMAND ENABLE
+command 0xc3 0x0d # VRH SET
+command 0xc4 0x20 # VDV SET
+command 0xc6 0xef # frame rate
+command 0x44 0x00 0x00 # SET TEARING SCAN LINE
+command 0xd0 0xa4 0xa1 # power control 1
+
+# gamma
+command 0xe0 0xd0 0x02 0x09 0x0d 0x0e 0x19 0x30 0x51 0x43 0x09 0x14 0x13 0x18 0x21
+command 0xe1 0xd0 0x02 0x09 0x0d 0x0d 0x18 0x32 0x46 0x42 0x09 0x13 0x13 0x17 0x21
+
+command 0x11 # sleep out
+delay 120
+command 0x29 # display on

devices/nokia-sparkler/00-nokia-leo-display.files

@@ -0,0 +1 @@
+/lib/firmware/nokia,leo-gc9305-hlt-24-panel.bin

devices/nokia-sparkler/00-nokia-sparkler-display.files

@@ -0,0 +1 @@
+/lib/firmware/nokia,sparkler-gc9307-hlt-28-panel.bin

devices/nokia-sparkler/APKBUILD

@@ -0,0 +1,62 @@
+# Reference: <https://postmarketos.org/devicepkg>
+maintainer=""
+pkgname=device-nokia-sparkler
+pkgdesc="Nokia 8000 4G"
+pkgver=7
+pkgrel=0
+url="https://postmarketos.org"
+license="GPL-2.0-only"
+arch="armv7"
+options="!check !archcheck"
+depends="
+	linux-postmarketos-qcom-msm8916
+	mkbootimg
+	postmarketos-base
+	soc-qcom-msm8909
+	soc-qcom-msm8916-rproc
+"
+subpackages="$pkgname-nonfree-firmware:nonfree_firmware"
+makedepends="devicepkg-dev mipi-dbi-cmd"
+_panel="nokia,sparkler-gc9307-hlt-28-panel"
+source="
+	$_panel.txt
+	00-nokia-sparkler-display.files
+	deviceinfo
+	kernel-cmdline.conf
+	modules-initfs
+	"
+
+build() {
+	devicepkg_build $startdir $pkgname
+	mkdir -p "$builddir"
+	mipi-dbi-cmd "$builddir"/"$_panel".bin \
+			"$srcdir"/"$_panel".txt
+}
+
+package() {
+	devicepkg_package $startdir $pkgname
+	# Package display init sequence
+	install -Dm644 "$builddir"/"$_panel".bin -t \
+			"$pkgdir"/lib/firmware/
+	install -Dm644 "$srcdir"/00-nokia-sparkler-display.files -t \
+			"$pkgdir"/usr/share/mkinitfs/files/
+}
+
+nonfree_firmware() {
+	pkgdesc="GPU/WiFi/BT/Modem/Video firmware"
+	depends="
+		firmware-qcom-adreno-a300
+		msm-firmware-loader
+		firmware-nokia-sparkler-venus
+		firmware-nokia-sparkler-wcnss-nv
+	"
+	mkdir "$subpkgdir"
+}
+
+sha512sums="
+721d740ff8dbbbafff4bc734228a82bd57d76177b9bf417d660ecb181a72a998319ddbde77d0efc5e875d2256596578212e3e0bfb85c2e77e5bbf6d0e88d9fa4  nokia,sparkler-gc9307-hlt-28-panel.txt
+89b3dd5bf1dd5e85bf66bfb6dba56e2a8e919fe3aa7dc369c18c9e56f7e0ae88319186551412497a601081b904c12dd07ebed4f39fd4a4ba6199fb8af9c90f40  00-nokia-sparkler-display.files
+5df56915a719654bd6d23b127c2d55b0445e731a0d1648c1c48188b0f84e62d1f83f34f2dbfe5e2c694525579cbe438e3a5b66cece6047b53dc9a2995a6fbfb2  deviceinfo
+37e1e5f8839b624ab3eb850a24ed4daeb61a651257a1fb593f49cb869323e5d1b339c831a18eb26a9d7bd0a618ea9eb2bb9bf3882133af5f2606a878e6d39c67  kernel-cmdline.conf
+d5dfe844a45cfc4e0844e43b8fb3e1bbcb155e06430188f8d5059fc5ce3c4100fde7f1580b1b54c5318f40d238736b233463582e55b9dd25654e40539e11ed39  modules-initfs
+"

devices/nokia-sparkler/APKBUILD.nokia-leo

@@ -0,0 +1,62 @@
+# Reference: <https://postmarketos.org/devicepkg>
+maintainer=""
+pkgname=device-nokia-leo
+pkgdesc="Nokia 6300 4G"
+pkgver=7
+pkgrel=0
+url="https://postmarketos.org"
+license="GPL-2.0-only"
+arch="armv7"
+options="!check !archcheck"
+depends="
+	linux-postmarketos-qcom-msm8916
+	mkbootimg
+	postmarketos-base
+	soc-qcom-msm8909
+	soc-qcom-msm8916-rproc
+"
+subpackages="$pkgname-nonfree-firmware:nonfree_firmware"
+makedepends="devicepkg-dev mipi-dbi-cmd"
+_panel="nokia,leo-gc9305-hlt-24-panel"
+source="
+	$_panel.txt
+	00-nokia-leo-display.files
+	deviceinfo
+	kernel-cmdline.conf
+	modules-initfs
+	"
+
+build() {
+	devicepkg_build $startdir $pkgname
+	mkdir -p "$builddir"
+	mipi-dbi-cmd "$builddir"/"$_panel".bin \
+			"$srcdir"/"$_panel".txt
+}
+
+package() {
+	devicepkg_package $startdir $pkgname
+	# Package display init sequence
+	install -Dm644 "$builddir"/"$_panel".bin -t \
+			"$pkgdir"/lib/firmware/
+	install -Dm644 "$srcdir"/00-nokia-leo-display.files -t \
+			"$pkgdir"/usr/share/mkinitfs/files/
+}
+
+nonfree_firmware() {
+	pkgdesc="GPU/WiFi/BT/Modem/Video firmware"
+	depends="
+		firmware-qcom-adreno-a300
+		msm-firmware-loader
+		firmware-nokia-sparkler-venus
+		firmware-nokia-sparkler-wcnss-nv
+	"
+	mkdir "$subpkgdir"
+}
+
+sha512sums="
+8583c7d5a97c4efedff3ec554cf682d815fd7b83140c2cab9eec4b6e2e735ce3c012bc3bd97f8bc75adc3483f76ce83a5bf1090d4f3e73a327efc64ca9eca5a7  nokia,leo-gc9305-hlt-24-panel.txt
+c9985232e5e64ddb0906b053e5024c87fa62cc1bcb254260e1ef6afb43d384196e09d41287143bcba61dff616dd6b562a5ca335dbe592fcd8c954642b8085f38  00-nokia-leo-display.files
+34c6269610e41b51b31b293cc3777a2af1776375617aecf001347e8d7e05a13b8bcf4ce82e13938a219493d780003631076dbd2f3f6fd26c249ec96b1b36219e  deviceinfo
+37e1e5f8839b624ab3eb850a24ed4daeb61a651257a1fb593f49cb869323e5d1b339c831a18eb26a9d7bd0a618ea9eb2bb9bf3882133af5f2606a878e6d39c67  kernel-cmdline.conf
+d5dfe844a45cfc4e0844e43b8fb3e1bbcb155e06430188f8d5059fc5ce3c4100fde7f1580b1b54c5318f40d238736b233463582e55b9dd25654e40539e11ed39  modules-initfs
+"

devices/nokia-sparkler/deviceinfo

@@ -0,0 +1,35 @@
+# Reference: <https://postmarketos.org/deviceinfo>
+# Please use double quotes only. You can source this file in shell
+# scripts.
+
+deviceinfo_format_version="0"
+deviceinfo_name="Nokia 8000 4G"
+deviceinfo_manufacturer="Nokia"
+deviceinfo_codename="nokia-sparkler"
+deviceinfo_year="2020"
+deviceinfo_dtb="qcom-msm8909-nokia-sparkler"
+deviceinfo_append_dtb="true"
+deviceinfo_arch="armv7"
+deviceinfo_swap_size_recommended="512"
+
+# Device related
+deviceinfo_chassis="handset"
+deviceinfo_external_storage="true"
+deviceinfo_screen_width="240"
+deviceinfo_screen_height="320"
+
+# Bootloader related
+deviceinfo_flash_method="fastboot"
+deviceinfo_generate_bootimg="true"
+deviceinfo_generate_extlinux_config="true"
+deviceinfo_flash_pagesize="2048"
+deviceinfo_header_version="0"
+deviceinfo_flash_offset_base="0x80000000"
+deviceinfo_flash_offset_kernel="0x00008000"
+deviceinfo_flash_offset_ramdisk="0x02700000"
+deviceinfo_flash_offset_second="0x00f00000"
+deviceinfo_flash_offset_tags="0x02500000"
+deviceinfo_flash_sparse="true"
+
+# lk2nd does not support GPT for subpartitions/SD cards yet
+deviceinfo_partition_type="msdos"

devices/nokia-sparkler/deviceinfo.nokia-leo

@@ -0,0 +1,35 @@
+# Reference: <https://postmarketos.org/deviceinfo>
+# Please use double quotes only. You can source this file in shell
+# scripts.
+
+deviceinfo_format_version="0"
+deviceinfo_name="Nokia 6300 4G"
+deviceinfo_manufacturer="Nokia"
+deviceinfo_codename="nokia-leo"
+deviceinfo_year="2020"
+deviceinfo_dtb="qcom-msm8909-nokia-leo"
+deviceinfo_append_dtb="true"
+deviceinfo_arch="armv7"
+deviceinfo_swap_size_recommended="512"
+
+# Device related
+deviceinfo_chassis="handset"
+deviceinfo_external_storage="true"
+deviceinfo_screen_width="240"
+deviceinfo_screen_height="320"
+
+# Bootloader related
+deviceinfo_flash_method="fastboot"
+deviceinfo_generate_bootimg="true"
+deviceinfo_generate_extlinux_config="true"
+deviceinfo_flash_pagesize="2048"
+deviceinfo_header_version="0"
+deviceinfo_flash_offset_base="0x80000000"
+deviceinfo_flash_offset_kernel="0x00008000"
+deviceinfo_flash_offset_ramdisk="0x02700000"
+deviceinfo_flash_offset_second="0x00f00000"
+deviceinfo_flash_offset_tags="0x02500000"
+deviceinfo_flash_sparse="true"
+
+# lk2nd does not support GPT for subpartitions/SD cards yet
+deviceinfo_partition_type="msdos"

devices/nokia-sparkler/kernel-cmdline.conf

@@ -0,0 +1,2 @@
+earlycon
+console=ttyMSM0,115200

devices/nokia-sparkler/modules-initfs

@@ -0,0 +1,3 @@
+pm8916-lbc
+pm8916-bms-vm
+panel-mipi-dbi

devices/nokia-sparkler/nokia,leo-gc9305-hlt-24-panel.txt

@@ -0,0 +1,69 @@
+# Based on arch/arm64/boot/dts/qcom/spi-panel-gc9305-hlt-24-qvga-cmd.dtsi from
+# the downstream kernel, which is:
+# Copyright (c) 2017, 2020, The Linux Foundation. All rights reserved.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License version 2 and
+# only version 2 as published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+
+command 0xfe
+command 0xfe
+command 0xef
+command 0x35 0x00
+command 0x36 0x48
+command 0x3a 0x05
+command 0x20
+command 0x38
+command 0x13
+command 0xa4 0x44 0x44
+command 0xa5 0x42 0x42
+command 0xa6 0x2a 0x2a
+command 0xa7 0x2b 0x2b
+command 0xa8 0x18 0x18
+command 0xa9 0x2a 0x2a
+command 0xaa 0x88 0x88
+command 0xac 0x00
+command 0xaf 0x55
+command 0xe1 0x10 0x26
+command 0xe3 0x01 0x10
+command 0xe8 0x11 0x77
+command 0xe0 0x0f
+command 0xe4 0x00
+command 0xe5 0x00
+command 0xe6 0x00
+command 0xe7 0x00 0x00
+command 0xea 0x51 0x95 0x00 0x00 0x00 0x00 0x00
+command 0xeb 0x30
+command 0xec 0x33 0x22 0x88
+command 0xed 0x18 0x08
+command 0xee 0x00
+command 0xa0 0x00
+command 0xa1 0x00
+command 0xa2 0x00
+command 0xa3 0x00
+command 0xab 0x00 0x00
+command 0xad 0x33
+command 0xae 0x2b
+command 0xde 0x00
+command 0xff 0x61
+command 0xdf 0x08
+command 0xb6 0x00 0x80 0x27
+command 0xf0 0x02 0x01 0x00 0x00 0x03 0x07
+command 0xf1 0x01 0x01 0x00 0x02 0x06 0x0e
+command 0xf2 0x08 0x06 0x32 0x03 0x04 0x46
+command 0xf3 0x10 0x0c 0x3e 0x06 0x03 0x4f
+command 0xf4 0x0b 0x16 0x15 0x1d 0x1e 0x0f
+command 0xf5 0x08 0x15 0x15 0x1b 0x1c 0x0f
+command 0xfd 0x00
+command 0x2a 0x00 0x00 0x00 0xef
+command 0x2b 0x00 0x00 0x01 0x3f
+command 0x44 0x00 0x40
+
+command 0x11 # exit sleep mode
+delay 120
+command 0x29 # display on

devices/nokia-sparkler/nokia,sparkler-gc9307-hlt-28-panel.txt

@@ -0,0 +1,26 @@
+# Based on arch/arm64/boot/dts/qcom/spi-panel-gc9307-hlt-28-qvga-cmd.dtsi from
+# the downstream kernel, which is:
+# Copyright (c) 2017, 2020, The Linux Foundation. All rights reserved.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License version 2 and
+# only version 2 as published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+
+command 0x11 # exit sleep mode
+delay 120
+command 0xfe
+command 0xef
+command 0x13
+command 0x38
+command 0x20
+command 0x36 0x00
+command 0x3a 0x05
+command 0x35 0x00
+command 0x89 0x0b
+command 0xeb 0x02
+command 0x29 # display on

devices/nokia-tough/00-nokia-coconut-display.files

@@ -0,0 +1,2 @@
+/lib/firmware/nokia,coconut-gc9305-panel.bin
+/lib/firmware/nokia,argon-gc9305-v2-panel.bin

devices/nokia-tough/deviceinfo

@@ -0,0 +1,31 @@
+# Reference: <https://postmarketos.org/deviceinfo>
+deviceinfo_format_version="0"
+deviceinfo_name="Nokia 800 Tough"
+deviceinfo_manufacturer="Nokia"
+deviceinfo_codename="nokia-coconut"
+deviceinfo_year="2019"
+deviceinfo_dtb="qcom-msm8905-nokia-coconut"
+deviceinfo_append_dtb="true"
+deviceinfo_arch="armv7"
+deviceinfo_swap_size_recommended="512"
+
+# Device related
+deviceinfo_chassis="handset"
+deviceinfo_external_storage="true"
+deviceinfo_screen_width="240"
+deviceinfo_screen_height="320"
+deviceinfo_drm="true"
+
+# Bootloader related
+deviceinfo_flash_method="fastboot"
+deviceinfo_generate_bootimg="true"
+deviceinfo_generate_extlinux_config="true"
+deviceinfo_flash_pagesize="2048"
+deviceinfo_header_version="0"
+deviceinfo_flash_offset_base="0x80000000"
+deviceinfo_flash_offset_kernel="0x00008000"
+deviceinfo_flash_offset_ramdisk="0x02700000"
+deviceinfo_flash_offset_second="0x00f00000"
+deviceinfo_flash_offset_tags="0x02500000"
+deviceinfo_flash_sparse="true"
+deviceinfo_partition_type="msdos"

devices/nokia-tough/kernel-cmdline.conf

@@ -0,0 +1,2 @@
+earlycon
+console=ttyMSM0,115200

devices/nokia-tough/modules-initfs

@@ -0,0 +1,5 @@
+pm8916-lbc
+pm8916-bms-vm
+panel-mipi-dbi
+matrix_keypad
+matrix_keymap

devices/nokia-tough/nokia,coconut-gc9305-panel.txt

@@ -0,0 +1,35 @@
+# Nokia 800 Tough (nokia-coconut) 2.4-inch 240x320 QVGA SPI MIPI-DBI panel
+# Based on arch/arm/boot/dts/argon/spi-panel-gc9305-v2-qvga-cmd from
+# the downstream kernel, which is:
+# Copyright (c) 2017, The Linux Foundation. All rights reserved.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License version 2 and
+# only version 2 as published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+
+command 0x36 0x00
+command 0x3a 0x55 # format: 65K 16bit
+command 0x35 0x00 # TE v-blanking
+command 0xb2 0x0c 0x0c 0x00 0x33 0x33 # porch setting
+command 0xb7 0x75 # gate control VGH VGL
+command 0xbb 0x34 # Vcoms setting 1.4v
+command 0xc0 0x2c # LCM control
+command 0xc2 0x01 # VDV VRH COMMAND ENABLE
+command 0xc3 0x0d # VRH SET
+command 0xc4 0x20 # VDV SET
+command 0xc6 0xef # frame rate
+command 0x44 0x00 0x00 # SET TEARING SCAN LINE
+command 0xd0 0xa4 0xa1 # power control 1
+
+# gamma
+command 0xe0 0xd0 0x02 0x09 0x0d 0x0e 0x19 0x30 0x51 0x43 0x09 0x14 0x13 0x18 0x21
+command 0xe1 0xd0 0x02 0x09 0x0d 0x0d 0x18 0x32 0x46 0x42 0x09 0x13 0x13 0x17 0x21
+
+command 0x11 # sleep out
+delay 120
+command 0x29 # display on