bananarchy/overlay/rootfs/usr/bin/sxmo_modemmonitor.sh

#!/bin/sh
# SPDX-License-Identifier: AGPL-3.0-only
# Copyright 2022 Sxmo Contributors

# include common definitions
# shellcheck source=scripts/core/sxmo_common.sh
. sxmo_common.sh

# see networkmanager documentation for these state names
statenumtoname() {
  case "$1" in
    "int32 -1") printf "failed" ;;
    "int32 0") printf "unknown" ;;
    "int32 1") printf "initializing" ;;
    "int32 2") printf "locked" ;;
    "int32 3") printf "disabled" ;;
    "int32 4") printf "disabling" ;;
    "int32 5") printf "enabling" ;;
    "int32 6") printf "enabled" ;;
    "int32 7") printf "searching" ;;
    "int32 8") printf "registered" ;;
    "int32 9") printf "disconnecting" ;;
    "int32 10") printf "connecting" ;;
    "int32 11") printf "connected" ;;
    *) printf "ERROR" ;;
  esac
}

mainloop() {
  # get initial modem state and handle SIM2/QMI PIN lock or unprovisioned slot
  (
    tries=0
    newstate=""
    while [ "$tries" -lt 15 ]; do
      newstate="$(mmcli -m any -K 2>/dev/null | grep "^modem.generic.state " | cut -d':' -f2 | sed 's/^ //')"
      if [ -n "$newstate" ]; then
        break
      fi
      sleep 2
      tries=$((tries + 1))
    done

    uim_st="$(doas -n /usr/libexec/msm-modem-uim-selection status 2>/dev/null || /usr/libexec/msm-modem-uim-selection status 2>/dev/null || true)"
    if printf "%s\n" "$uim_st" | grep -qE "SLOT[12]_PIN1_STATE=(enabled-not-verified|blocked)|SLOT[12]_APP_STATE=(pin1|puk1)"; then
      newstate="locked"
    elif printf "%s\n" "$uim_st" | grep -qE "SLOT[12]_STATE=present" && printf "%s\n" "$uim_st" | grep -q "^PRIMARY_GW_SLOT=0$"; then
      doas -n /usr/libexec/msm-modem-uim-selection boot >/dev/null 2>&1 || true
      newstate="$(mmcli -m any -K 2>/dev/null | grep "^modem.generic.state " | cut -d':' -f2 | sed 's/^ //')"
    fi

    if [ -n "$newstate" ]; then
      # fake oldstate (boot) and reason (0)
      sxmo_hook_modem.sh "boot" "$newstate" "0"
      sxmo_hook_statusbar.sh modem
    fi
  ) &

  # Monitor for incoming calls
  dbus-monitor --system "interface='org.freedesktop.ModemManager1.Modem.Voice',type='signal',member='CallAdded'" |
    while read -r line; do
      echo "$line" | grep -qE "^signal" && sxmo_modem.sh checkforincomingcalls
    done &

  # Monitor for incoming texts
  dbus-monitor --system "interface='org.freedesktop.ModemManager1.Modem.Messaging',type='signal',member='Added'" |
    while read -r line; do
      echo "$line" | grep -qE "^signal" && sxmo_modem.sh checkfornewtexts
    done &

  # Check for new texts periodically
  sxmo_run_aligned.sh 300 sxmo_modem.sh checkfornewtexts &

  # Monitor for finished calls
  dbus-monitor --system "interface='org.freedesktop.DBus.Properties',member='PropertiesChanged',arg0='org.freedesktop.ModemManager1.Call'" |
    while read -r line; do
      echo "$line" | grep -qE "^signal" && sxmo_modem.sh checkforfinishedcalls
    done &

  # Periodically remove finished calls
  sxmo_run_aligned.sh 300 sxmo_modem.sh checkforfinishedcalls &

  # Monitor for modem state change
  dbus-monitor --system "interface='org.freedesktop.ModemManager1.Modem',type='signal',member='StateChanged'" |
    while read -r line; do
      if echo "$line" | grep -qE "^signal.*StateChanged"; then
        read -r oldstate
        read -r newstate
        read -r reason
        sxmo_hook_modem.sh "$(statenumtoname "$oldstate")" \
          "$(statenumtoname "$newstate")" \
          "$(echo "$reason" | sed 's/uint32 //')"
        sxmo_hook_statusbar.sh modem
      fi
    done &

  # Monitor for 3GPP USSD
  dbus-monitor --system "interface='org.freedesktop.DBus.Properties',member='PropertiesChanged',arg0='org.freedesktop.ModemManager1.Modem.Modem3gpp.Ussd'" |
    while read -r line; do
      case "$line" in
        *"/org/freedesktop/ModemManager1/Modem"*)
          MODEM=$(echo "$line" | awk -F'[;=]' '{print $6}')
          CHANGED=0
          ;;
        *"string \"NetworkNotification"*)
          TYPE="NetworkNotification"
          CHANGED=1
          ;;
        *"string \"NetworkRequest"*)
          TYPE="NetworkRequest"
          CHANGED=1
          ;;
        *)
          CHANGED=0
          ;;
      esac

      if [ "$CHANGED" = "1" ]; then
        # Handle unsolicited USSD in background without spawning a terminal window
        sxmo_ussd.sh "$MODEM" "$TYPE" "" &
      fi

    done &

  if [ -f "${SXMO_MMS_BASE_DIR:-"$HOME"/.mms/modemmanager}/mms" ]; then
    # monitor for received mms
    dbus-monitor "interface='org.ofono.mms.Service',type='signal',member='MessageAdded'" |
      while read -r line; do
        if echo "$line" | grep -q '^object path'; then
          MESSAGE_PATH="$(echo "$line" | cut -d\" -f2)"
        fi
        if echo "$line" | grep -q 'string "received"'; then
          sxmo_mms.sh processmms "$MESSAGE_PATH"
        fi
      done &
  fi

  if [ -f "${SXMO_VVM_BASE_DIR:-"$HOME"/.vvm/modemmanager}/vvm" ]; then
    # monitor for vvm (Visual Voice Mail)
    VVM_START=0
    dbus-monitor "interface='org.kop316.vvm.Service',type='signal',member='MessageAdded'" |
      while read -r line; do
        if echo "$line" | grep -q '^object path'; then
          VVM_ID="$(echo "$line" | cut -d\" -f2 | rev | cut -d'/' -f1 | rev)"
          VVM_START=1
        fi

        if echo "$line" | grep -q '^]'; then
          VVM_START=0
          sxmo_vvm.sh processvvm "$VVM_DATE" "$VVM_SENDER" "$VVM_ID" "$VVM_ATTACHMENT"
        fi

        if [ "$VVM_START" -eq 1 ]; then
          if echo "$line" | grep -q '^string "Date"'; then
            read -r line
            VVM_DATE="$(echo "$line" | cut -d\" -f2)"
          elif echo "$line" | grep -q '^string "Sender"'; then
            read -r line
            VVM_SENDER="$(echo "$line" | cut -d\" -f2)"
          elif echo "$line" | grep -q '^string "Attachments"'; then
            read -r line
            VVM_ATTACHMENT="$(echo "$line" | cut -d\" -f2)"
          fi
        fi
      done &
  fi

  wait
}

# new session, clean up all phone related files
rm "$XDG_RUNTIME_DIR/sxmo_calls/"* 2>/dev/null || true
rm -f "$XDG_RUNTIME_DIR"/sxmo.ring.pid 2>/dev/null
rm -f "$SXMO_NOTIFDIR"/incomingcall* 2>/dev/null
mainloop