65 lines
2.7 KiB
Bash
65 lines
2.7 KiB
Bash
|
#!/bin/sh
|
||
|
|
# Build and install the patched bwn driver (if_bwn.ko), the patched PCIe
|
||
|
|
# bridge (bhndb_pci.ko) and the Broadcom v4 firmware (bwn_v4_n.ko) on a
|
||
|
|
# clean FreeBSD 15.1 system.
|
||
|
|
#
|
||
|
|
# Usage: sudo ./build.sh [SRC_ROOT]
|
||
|
|
# Default SRC_ROOT=/usr/src
|
||
|
|
#
|
||
|
|
# What it does:
|
||
|
|
# 1. Builds if_bwn.ko (sys/modules/bwn) -> /boot/modules/if_bwn.ko
|
||
|
|
# 2. Builds bhndb_pci.ko(sys/modules/bhnd/bhndb_pci) -> /boot/kernel/bhndb_pci.ko
|
||
|
|
# 3. Builds bwn_v4_n.ko (src/firmware) -> /boot/modules/bwn_v4_n.ko
|
||
|
|
# 4. Adds "bwn_v4_n_load=YES" to /boot/loader.conf (Fix 5) if missing.
|
||
|
|
#
|
||
|
|
# All changes take effect on the NEXT reboot (modules are only loaded at
|
||
|
|
# boot). The running kernel is NOT touched, so an active SSH session (e.g.
|
||
|
|
# over the fallback rtwn0/wlan0 interface) is never disrupted by this script.
|
||
|
|
#
|
||
|
|
# After reboot, bwn0 attaches on the BCM43224 and uses legacy INTx (the
|
||
|
|
# NO_MSI quirk), so TX interrupts are delivered and the "device timeout" /
|
||
|
|
# detach-panic / heap-corruption issues are resolved.
|
||
|
|
set -e
|
||
|
|
SRC="${1:-/usr/src}"
|
||
|
|
HERE="$(cd "$(dirname "$0")" && pwd)"
|
||
|
|
|
||
|
|
if [ ! -d "$SRC/sys" ]; then
|
||
|
|
echo "ERROR: $SRC/sys not found. Point SRC_ROOT at a FreeBSD 15.1 src tree." >&2
|
||
|
|
exit 1
|
||
|
|
fi
|
||
|
|
|
||
|
|
echo "==> [1/3] Building if_bwn.ko"
|
||
|
|
make -C "$SRC/sys/modules/bwn" SRCTOP="$SRC" SYSDIR="$SRC/sys" clean
|
||
|
|
make -C "$SRC/sys/modules/bwn" SRCTOP="$SRC" SYSDIR="$SRC/sys"
|
||
|
|
install -m 444 -o root -g wheel "$SRC/sys/modules/bwn/if_bwn.ko" /boot/modules/if_bwn.ko
|
||
|
|
sync
|
||
|
|
echo " -> /boot/modules/if_bwn.ko"
|
||
|
|
|
||
|
|
echo "==> [2/3] Building bhndb_pci.ko (NO_MSI quirk)"
|
||
|
|
make -C "$SRC/sys/modules/bhnd/bhndb_pci" SRCTOP="$SRC" SYSDIR="$SRC/sys" clean
|
||
|
|
make -C "$SRC/sys/modules/bhnd/bhndb_pci" SRCTOP="$SRC" SYSDIR="$SRC/sys"
|
||
|
|
install -m 444 -o root -g wheel "$SRC/sys/modules/bhnd/bhndb_pci/bhndb_pci.ko" /boot/kernel/bhndb_pci.ko
|
||
|
|
sync
|
||
|
|
echo " -> /boot/kernel/bhndb_pci.ko"
|
||
|
|
|
||
|
|
echo "==> [3/3] Building + installing bwn_v4_n.ko (firmware)"
|
||
|
|
make -C "$HERE/src/firmware" SRCTOP="$SRC" SYSDIR="$SRC/sys" clean
|
||
|
|
make -C "$HERE/src/firmware" SRCTOP="$SRC" SYSDIR="$SRC/sys"
|
||
|
|
install -m 444 -o root -g wheel "$HERE/src/firmware/bwn_v4_n.ko" /boot/modules/bwn_v4_n.ko
|
||
|
|
sync
|
||
|
|
echo " -> /boot/modules/bwn_v4_n.ko"
|
||
|
|
|
||
|
|
echo "==> Adding firmware load to /boot/loader.conf (Fix 5)"
|
||
|
|
if ! grep -q 'bwn_v4_n_load="YES"' /boot/loader.conf 2>/dev/null; then
|
||
|
|
cp /boot/loader.conf "$HERE/rc.conf.backups/loader.conf.before_build_$(date +%Y%m%d%H%M%S)"
|
||
|
|
printf '\n# bwn driver: load Broadcom v4 firmware at loader time (Fix 5)\nbwn_v4_n_load="YES"\n' >> /boot/loader.conf
|
||
|
|
echo " added bwn_v4_n_load=YES"
|
||
|
|
else
|
||
|
|
echo " already present, skipped"
|
||
|
|
fi
|
||
|
|
|
||
|
|
echo
|
||
|
|
echo "==> All modules built and installed. REBOOT to activate."
|
||
|
|
echo " After reboot, create the interface with:"
|
||
|
|
echo " ifconfig wlan create wlandev bwn0 [wap]"
|